KAF SERIES COMPRESSED AIR INLINE FILTER
Generalize:
Compressed air inline filters are now recognized as being an integral part of any system. Few, if any, compressed air systems can be operated successfully without high efficiency inline air filters.
Production and process standards demand the finest quality air and end products are now manufactured to such tight tolerance that no contamination is permitted.
Features
Particle removal po-filter Oil rerroval filter
Installed in the back of compressor and in front of refrigerated air dryer to remove solid and liquid particle sizes above 3 microm;
Installed in front of s grade filter or in the back of desiccant air dryer to remove soid and liquid particle sizes down to 1 micror.the remaning oil contert is 0.5ppm
High efficiency oil mist rerroval after-filter
Installed in front of desccant air dryer or in the back of retnigeratec air dryer to remove ail vapour to 0.01 micron.instail m grade filter before is recommended
Actiated carbon filter
Installed behind s grade fito to romevo hydraucarbone or odour.the remaining oil conter is 0.003ppm. the filtrated air is of high-quality.install s grade filter before is recommended
Specifications
| Model | Air flow (Nm³/min) |
Air connection (RP) |
weight kg |
Dimension(mm) | Working pressure Bar(g) |
|
| H | W | |||||
| KAF007 | 0.7 | Rp3/4″ | 1.1 | 267 | 89 | ≤16bar |
| KAF015 | 1.5 | 1.1 | 267 | 89 | ||
| KAF024 | 2.4 | Rp1-1/2″ | 2.2 | 366.5 | 109 | |
| KAF035 | 3.5 | 2.2 | 366.5 | 109 | ||
| KAF060 | 6.0 | 2.7 | 515 | 109 | ||
| KAF090 | 9.0 | Rp2-1/2″ | 4.5 | 550 | 150 | |
| KAF120 | 12.0 | 7 | 928 | 150 | ||
| KAF150 | 15.0 | 8 | 928 | 150 | ||
| KAF200 | 20.0 | DN80 | 27 | 780 | 400 |
≤10ar |
| KAF240 | 24.0 | 30 | 780 | 400 | ||
| KAF360 | 36.0 | 35 | 1000 | 405 | ||
| KAF450 | 45.0 | DN100 | 40 | 1005 | 565 | |
| KAF550 | 55.0 | 45 | 1005 | 565 | ||
| KAF600 | 65.0 | DN125 | 60 | 1205 | 570 | |
| KAF900 | 90.0 | DN150 | 100 | 1150 | 670 | |
| KAF1200 | 120.0 | DN150 | 160 | 1430 | 650 | |
KAF SERIES COMPRESSED AIR INLINE FILTER Application
Compressed air is the most widely used source of basic power in industry, which features such characteristics including convenience, rapidness, safe and cost saving. However, the following pollutants exist in the system and they combine into acid oil mud with causticity, which is the pollution source in the compressed air.
Water
Water moisture produced by air through compression and condensation fills the air pipes to cause rust and erode pipes.
Oil Fume
Apart from small amount of oil presents in air, lubricated air compressors produce oily air to pollute products and production processes as well.
Particles
Solid particles exist in air and produced through high temperature operation inside the air compressors erode pneumatic tools, motors and parts in cylinders, cause blocking or breaking.
Odour
Toxic gases including hydrocarbon and carbon monoxide not only affect the working efficiency of the employees, but also pollute the respiratory air.
These pollutants not only rust air pipes, increase voltage (operation cost), damage precise instrument and cause machines malfunction. In addition, they even influence the product quality, reduce production efficiency, endanger body health and increase production cost. Dry and clean compressed air is your best partner, it ensures the quality of your products and reduces possibility of production down time, so as to save you a considerable amount of maintenance expenses and production costs.


Đánh giá
Chưa có đánh giá nào.